The Two Essential Horizontal Beam Saws

  • By:Zhunda
  • Date:2021/11/10

The basic difference between vertical and horizontal beam saws is that vertical ones are lighter and have a shorter operating lifespan. Horizontal beam saws are more compact and easier to store. There are a number of advantages to using a horizontal beam saw including its ease of use, versatility, and lightweight. The following paragraphs provide information on the differences between the two saw types and the reasons why one is preferred over the other. The first step in deciding which type of saw is best suited for your needs is to do some research. Below are several important tips to help you make the right decision.


The primary difference between vertical panel saw machine and a horizontal beam panel saw is that the latter uses a spinning blade that is attached to a vertical shaft. Most horizontal beam saws need more room to store than vertical ones. These saws usually contain: a fixed head containing the blade that rotates 180 degrees to create horizontal or vertical cuts. On the other hand, most vertical panel saws have a separate blade and are stored in a separate cabinet or on a workbench.


Another difference between the two saw types is that the vertical panel has a blade that projects from a stationary head. This means that you have to manually control the blade height as well as rotate it during the process. The horizontal beam saw uses a pusher system that automatically controls the angle of the blade. The blade projections are automatically held at a particular angle to ensure that the cuts are consistent.


The two saw systems that use a fixed blade are generally referred to as flat top and kappa automatic saw carriage. In a flat top system, there is only a single blade that projects from a single point. The cutting angle of this type of saw is usually set by rotating a single gear in the vertical direction. Meanwhile, the Zhunda automatic saw carriage uses a variable range of gears and is known for its circular or linear motion.


The two saw systems can be powered either mechanically or electronically. The flat top system uses a manual transmission while the system uses electrical motors. The most commonly used electrical motors are the corded types that are found in both vertical and horizontal beam panel saw units. However, you may also find cordless electric units that allow the operator to directly control the blade cutting path.


There are many types of saws available for home improvement purposes. However, the two types that are commonly used are the vertical and the horizontal units. Both of these saw types are perfect for small to medium-sized projects that require straight, level cuts. Moreover, both these saws are easy to operate and use. For more information on the types of industrial panel saws that you may find in your shops, it would be better if you browse through some web sites online that feature various models of these beams.





Foshan Zhunda Machinery Co., Ltd.

We are always providing our customers with reliable products and considerate services.


If you would like to keep touch with us directly, please go to contact us

  • Home


  • Tel


  • Email


  • Contact