Reciprocating Panel Saw ZS227

Reciprocating Panel Saw ZS227

Industrial PC control system

1. Easy operation, safety & reliable.
2. Which has complete operating hints and troubleshooting guide functions.
3. It’s cutting plan can edit manually; can simulate or execute cutting plans.

Main steel frame

1.After the welding of the frame is completed, it is placed for one month, and then heat treated,
2.Eliminate the residual stress generated during the machining process,Change the crystal structure inside the material,
3.Enhance the stability of the subject,
4.Afterwards, it will be treated for 6 months,
5.Then send to the machining center for precision machining.Reciprocating Panel Saw ZS227

Reciprocating Panel Saw ZS227

machine structure

1.high-quality raw materials, using the leading CO² gas shielded welding process technology; 2.The table is made of 28mm integrated plate and fixed on the left and right frame beams. 3.Can guarantee excellent balance performance and straightness; 4.The movement of independent main saw and scoring saw can automatically adjust the cutting height according to the cutting thickness;

5.The supporting connecting rod adopts closed inner frame structure,Effectively guarantee the stability of the main body and the service life of the whole machineReciprocating Panel Saw ZS227

Sawing motors

1. Two saw blades driving by two separately motors; 2. Saw carrier driving by servo motor; 3. Main saw motor 11KW, max cutting thickness: 80mm;4. Scoring saw motor1.5KW ;Reciprocating Panel Saw ZS227

Model

ZS227

ZS233

Maximum processing size

2500mm

3100mm

Main Blade diameter

Φ350mm

Φ350mm

Max. Height of blade

80mm

80mm

Main saw motor power

11kw

11kw

Rotation speed of main saw spindle

4600r/min

4600r/min

Main saw spindle diameter

30mm

30mm

Scoring blade diameter

180mm

180mm

Scoring motor power

1.5kw

1.5kw

Rotation speed of scoring saw spindle

7200r/min

7200r/min

Scoring saw spindle diameter

30mm

30mm

Drive motor of saw carriage

1.5kw

1.5kw

Working pressure

0.6Mpa

0.6Mpa

Working table height

830mm

830mm

Dimension (about)

5000X3550X1650mm

5600X3550X1650mm

Weight (about)

2800kg

3300kg

Automatic reciprocating panels saw is self-cleaning devices that allow for an increase in the speed of cutting. This product comes with a variety of options to fit various cutting requirements. Automatic reciprocating panel saw for wood cutting is ideal for splitting various hard material panels, including plywood, plastic sheet, acrylic board, PVC board, aluminum metal and many others in both horizontal and vertical cut; it can also cut melamine and MDF. This equipment also comes with variable speed settings and cutting blade types for all cuts. It has a handy cord release system to eliminate the need for messy cords.

  

ZHUNDA Machinery's automatic reciprocating panel saw for woodworking is similar to the older style wet saw except it uses compressed air for the mechanism rather than steam or water. The compressed air makes this equipment more efficient than the usual steam powered panel saw. Reciprocating is a simple process that allows the panel to rotate at a faster rate than a fixed blade saw.

  

When the blades touch, they make a "kickback" motion that tends to wear the panel down. But with the new design, the blades don't touch and there's no kickback; therefore, the panel does not wear down. This equipment also has variable speed controls that let you choose the right speeds for the different cuts. In addition to saving time, it also helps to conserve energy. The amount of power used to operate this saw is about one third less than the typical wet saw. The extra power helps the operator to cut more nails, lumber and carpet with ease.

  

As far as the panel saw for wood cutting is concerned, these are usually powered with either a 9V battery or a power cord. The power cord is connected to an electric outlet. To use the equipment, the operator plugs the electric cord into an outlet on the wall. It takes a few seconds for the saw to warm up, but once it is ready, the operator places the blade inside the panel and starts the action. The reciprocating motion starts and the blade automatically spin. The motor adds power as the blade revolves and the saw automatically cuts through the material.

  

reciprocating panel saw comes with various accessories that make the operation easier and safer. These accessories include adjustable heaters and safety stops. The heaters allow the operator to set the heat settings for different materials. Likewise, the safety stops limit the amount of force that is directed on the surface during operations. This prevents the operator from inadvertently cutting past the material.

  

In addition, automatic panel saws are designed in such a way that their kickback prevention ensures minimal injuries. Kickback is the term given to the accidental side-cutting of the blade. Most automatic saws have a safety guard that prevents the blade from accidentally cutting into a person's leg. An automatic panel saw with a self-retracting blade is especially useful because the kickback can be corrected automatically using the safety guard.

INQUIRY

CONTACT US

contact-email
contact-logo

Foshan Zhunda Machinery Co., Ltd.

We are always providing our customers with reliable products and considerate services.

If you would like to keep touch with us directly, please go to contact us

  • Home

    Home

  • Tel

    Tel

  • Email

    Email

  • Contact

    Contact